50 ENShooting2Zoom frame AF/zoom AF (Super Spot AF)You can zoom in on a portion of the frame when adjusting focus. Choosing a highzoom ratio allows you to use autofocus to focus on a smaller area than is normallycovered by the AF target. You can also position the focus target more precisely.01:02:0301:02:033030250250 F5.6 0.00.0L NS-IS AUTOS-IS AUTOISO-A200Wi-FiFHD F60 PShooting display01:02:0301:02:033030250250 F5.6 0.00.0L NS-IS AUTOS-IS AUTOISO-A200OffWi-FiFHD F60 PZoom frame AF Zoom AFUU UUUUU (Press and hold) / Q1 Pre-assign a (zoom icon) to one of the buttons using [Button Function] (P. 64).2 Press and release the U button to display the zoom frame.• If the camera was focused using autofocus just before the button was pressed, thezoom frame will be displayed at the current focus position.• Use FGHI to position the zoom frame.• Press the INFO button and use FG to choose the zoom ratio. (×3, ×5, ×7, ×10,×14)3 Press and release the U button again to zoom in on the zoom frame.• Use FGHI to position the zoom frame.• You can change the zoom ratio by rotating the front dial (r) or rear dial (o).4 Press the shutter button halfway to initiate autofocus.• The camera will focus using the subject in the frame at the center of the screen. Tochange the focus position, move it by touching the screen.$ Notes• You can also display and move the zoom frame using touch screen operations.Cautions• Zoom is visible only in the monitor and has no effect on the resulting photographs.• When you are using a Four Thirds system lens, the AF will not operate with during zoomdisplay.• While zoomed in, a sound is made by the IS (Image Stabilizer).
