90 ENMenu functions (Custom menus)4U Disp/8/PCOption Description gHDMI [HDMI Out]: Selecting the digital video signal format forconnecting to a TV via an HDMI cable.[HDMI Control]: Select [On] to allow the camera to beoperated using remotes for TVs that support HDMI control.100Video Out Choose the video standard ([NTSC] or [PAL]) used in yourcountry or region. 100KControlSettingsChoose the controls displayed in each shooting mode.ControlsShooting modeA P/A/S/M ART SCNLive Control (P. 44) Live SCP (P. 103) Live Guide (P. 22) – – –Art Menu – – –Scene Menu – – – Press the INFO button to switch the screen contents.102G/Info Settings Choose the information displayed when the INFO button ispressed.[q Info]: Choose the information displayed in full frameplayback.[LV-Info]: Choose the information displayed when thecamera is in shooting mode.[G Settings]: Choose the information displayed in index,“My Clips”, and calendar playback.105,106Displayed Grid Select [w], [x], [y], [X] or [x] to display a grid on themonitor. —Picture ModeSettingsDisplay only the selected picture mode when a picture modeis selected. —HistogramSettings[Highlight]: Choose the lower bound for the highlight display.[Shadow]: Choose the upper bound for the shadow display. 105Mode Guide Choose [Off] to not display help for the selected mode whenthe mode dial is rotated to a new setting. 20Live View Boost Shoot while checking the subject even under low-lightconditions.If [On] is selected, prioritize image visibility in darkconditions. This will make the response to button operationson the camera slower.—Frame Rate Select [High] to reduce frame lag. However, the imagequality may drop. —Art LV Mode [mode1]: The fi lter effect is always displayed.[mode2]: Filter effects are not visible in the monitor while theshutter button is pressed halfway. Choose for a smoothdisplay.—Flicker reduction Reduce the effects of flicker under some kinds of lighting,including fl uorescent lamps. When flicker is not reduced bythe [Auto] setting, set to [50Hz] or [60Hz] in accordance withthe commercial power frequency of the region where thecamera is used.—MENU c U
