Olympus E-PM1 Instruction Manual

Also see for E-PM1: Specifications Basic Manual Manual de instrucciones Manuel d'instructions

Contents

Olympus E-PM1 Instruction Manual Manual pdf 56 page image

56 ENOther shooting options2Recording multiple exposures in a single image(multiple exposure)Record multiple exposures in a single image, using the option currently selected forimage quality.1 Select [Multiple Exposure] in shooting menu X (P. 107).2 Adjust settings. Multiple ExposureOffOffFrameAuto GainOverlayOffBack SetFrame Select [2f].Auto GainWhen set to [On], the brightness of eachframe is set to 1/2 and the images areoverlaid. When set to [Off], the imagesare overlaid with the original brightnessof each frame.OverlayWhen set to [On], a RAW imagerecorded on a card can be overlaid withmultiple exposures and stored as aseparate image. The number of picturestaken is one.a is displayed in the monitor while multiple exposureis in effect.3 Take pictures.a is displayed in green when shooting starts.The previous shot is superimposed on the view throughthe lens as a guide to framing the next shot.••• 250 F5.6ISO400L N0.00.0 01:02:0301:02:033838PHD% TipsTo overlay 3 or more frames: Select RAW for [K] and use the [Overlay] option to makerepeated multiple exposures.For more information on overlaying RAW images: g “Image overlay” (P. 68)# CautionsThe camera will not go to sleep while multiple exposure is in effect.Photographs taken with other cameras can not be included in a multiple exposure.When [Overlay] is set to [On], the images displayed when a RAW image is selected aredeveloped with the settings at the time of shooting.To set the shooting functions, cancel multiple exposure shooting first. Some functionscannot be set.Multiple exposure is cancelled automatically from the first picture in the followingsituations.The camera is turned off/The q button is pressed/The MENU button is pressed/Theshooting mode is set to a mode other than P, A, S, M/The battery power runs out/Any cable is connected to the camera/You switch between the monitor and electronicviewfinderWhen a RAW image is selected using [Overlay], the JPEG image for the image recordedin JPEG+RAW is displayed.When shooting multiple exposures using bracketing, priority is given to multiple exposureshooting. While the overlay image is being saved, bracketing is reset to the factory defaultsetting.•••••••••