AppendixEN 61•To protect the high-precision technology contained in this product, never leave the camera in theplaces listed below, no matter if in use or storage:• Places where temperatures and/or humidity are high or go through extreme changes. Direct sunlight,beaches, locked cars, or near other heat sources (stove, radiator, etc.) or humidifiers.• In sandy or dusty environments.• Near flammable items or explosives.• In wet places, such as bathrooms or in the rain. When using products with weatherproof designs, readtheir manuals as well.• In places prone to strong vibrations.•Never drop the camera or subject it to severe shocks or vibrations.•When mounted on a tripod, adjust the position of the camera with the tripod head. Do not twist thecamera.•Do not touch electric contacts on cameras.•Do not leave the camera pointed directly at the sun. This may cause lens or shutter curtain damage,color failure, ghosting on the CCD, or may possibly cause fires.•Do not push or pull severely on the lens.•Before storing the camera for a long period, remove the battery. Select a cool, dry location for storageto prevent condensation or mold from forming inside the camera. After storage, test the camera byturning it on and pressing the shutter release button to make sure that it is operating normally.•Always observe the operating environment restrictions described in the camera’s manual.•Do not push the monitor forcibly; otherwise the image may become vague, resulting in a playbackmode failure or damage to the LCD monitor.•A strip of light may appear on the top/bottom of the monitor, but this is not a malfunction.•When a subject is viewed diagonally in the camera, the edges may appear zigzagged on the monitor.This is not a malfunction; it will be less noticeable in playback mode.•In places subject to low temperatures, the LCD monitor may take a long time to turn on or its color maychange temporarily. When using the camera in extremely cold places, it is a good idea to occasionallyplace it in a warm place. An LCD monitor exhibiting poor performance due to low temperatures willrecover in normal temperatures.•The LCD used for the monitor is made with high-precision technology. However, black spots or brightspots of light may appear constantly on the LCD monitor. Due to its characteristics or the angle atwhich you are viewing the monitor, the spot may not be uniform in color and brightness. This is not amalfunction.•Olympus makes no representations or warranties regarding any damages, or benefit expected byusing this unit lawfully, or any request from a third person, which are caused by the inappropriate useof this product.•Olympus makes no representations or warranties regarding any damages or any benefit expected byusing this unit lawfully which are caused by erasing picture data.•Olympus makes no representations or warranties, either expressed or implied, by or concerning anycontent of these written materials or software, and in no event shall be liable for any implied warrantyof merchantability or fitness for any particular purpose or for any consequential, incidental or indirectdamages (including but not limited to damages for loss of business profits, business interruption andloss of business information) arising from the use or inability to use these written materials or softwareor equipment. Some countries do not allow the exclusion or limitation of liability for consequential orincidental damages, so the above limitations may not apply to you.•Olympus reserves all rights to this manual.Unauthorized photographing or use of copyrighted material may violate applicable copyright laws.Olympus assumes no responsibility for unauthorized photographing, use or other acts that infringeupon the rights of copyright owners.Caution for Usage EnvironmentLCD MonitorLegal and Other NoticesDisclaimer of WarrantyWarning