Olympus FE-280 Instruction Manual

Also see for C-520: Basic Manual Instruction manual Advanced manual Manuel Avancé

38 ENUsing OLYMPUS Master1 Make sure the camera is turned off.• The monitor is off.• The lens is retracted.2 Connect the multi-connector on the camera to theUSB port on the computer using the provided USBcable.• Refer to your computer’s instruction manual to locate the positionof the USB port.• The camera turns on automatically.• The monitor turns on and the selection screen for the USBconnection is displayed.3 Select [PC], and press .4 The camera is recognized by the computer.• WindowsWhen you connect the camera to your computer for the first time,the computer attempts to recognize the camera. Click “OK” to exit the message that isdisplayed. The camera is recognized as a “Removable Disk”.• MacintoshThe iPhoto program is the default application for managing digital images. When you connectyour digital camera for the first time, the iPhoto application starts automatically, so close thisapplication and start OLYMPUS Master.Note• The camera functions are disabled while the camera is connected to a computer.• Connecting the camera to a computer via a USB hub may cause unstable operation. In thiscase, do not use a hub, but connect the camera directly to the computer.• Images cannot be transferred to your computer with OLYMPUS Master if [PC] is selected inStep 3, Y is pressed and [MTP] is selected.Windows1 Double-click the “OLYMPUS Master 2” icon on the desktop.Macintosh1 Double-click the “OLYMPUS Master 2” icon in the “OLYMPUSMaster 2” folder.• The browse window is displayed.• When OLYMPUS Master is started up for the first time after installation, the OLYMPUS Masterinitial setting screen and user registration screen are displayed before the browse window.Follow the on-screen instructions.Connecting the camera to a computerStart up the OLYMPUS Master softwareConnector coverMulti-connectorOKUSBPCEASY PRINTCUSTOM PRINTEXITSET