Olympus FE-280 Instruction Manual

Also see for C-520: Basic Manual Instruction manual Advanced manual Manuel Avancé

48 ENGetting to know your camera betterWhen you get an error message on the camera...Monitor indication Possible cause Corrective actionqCARD ERRORThere is a problem with thecard.This card cannot be used. Insert a new card.qWRITE PROTECTWriting to the card isprohibited.The recorded image has been protected(read-only) on a computer. Download theimage to a computer and cancel the read-only setting.>MEMORY FULLThe internal memory has noavailable memory andcannot store any new data.Insert a card or erase unwanted data. Beforeerasing, backup the data of importantpictures using the card, or download suchpictures to a computer.qCARD FULLThe card has no availablememory and cannot storeany new data.Replace the card or erase unwanted data.Before erasing, download important picturesto a computer.LNO PICTUREThere are no pictures in theinternal memory or on thecard.The internal memory or the card contains nopictures.Record pictures.rPICTURE ERRORThere is a problem with theselected picture and itcannot be played back onthis camera.Use image processing software to view thepicture on a computer. If that cannot bedone, the image file is damaged.rTHE IMAGECANNOT BEEDITEDPictures taken by othercameras or previouslyedited or corrected picturescannot be edited or fixed.Use image processing software to edit thepictures.CARD-COVEROPENThe battery/cardcompartment cover is open.Close the battery/card compartment cover.gBATTERY EMPTYThe battery is empty. Charge the battery.The data in the card cannotbe read. Or, the card is notformatted.• Select [xD CARD CLEAN], and press .Remove the card and wipe the contactarea with a soft dry cloth.• Select [FORMAT] [YES] and press .All data on the card is erased.There is an error in theinternal memory.Select [MEMORY FORMAT] [YES] andpress . All data in the internal memory iserased.NO CONNECTIONThe camera is notconnected to the computeror the printer correctly.Disconnect the camera and connect it againcorrectly.NO PAPERThere is no paper in theprinter.Load some paper into the printer.NO INKThe printer has run out ofink.Replace the ink cartridge in the printer.OKC A R D S E T U PxD CARD CLEANFORMATSETOKM E M O R Y S E T U PPOWER OFFMEMORY FORMATSET