Using OLYMPUS MasterEN 37To disconnect the camera1 Make sure that the card access lamp hasstopped blinking.2 Make the following preparations fordisconnecting the USB cable.Windows1 Click the “Unplug or Eject Hardware” icon in thesystem tray.2 Click the message that is displayed.3 When a message is displayed saying that the hardwarecan be ejected safely, click “OK”.Macintosh1 The trash icon changes to the eject icon when the“Untitled” or “NO_NAME” icon on the desktop is dragged.Drag and drop it on the eject icon.3 Disconnect the USB cable from the camera.Note• Windows: When you click “Unplug or Eject Hardware”, a warning message may bedisplayed. Make sure that image data is not being downloaded from the camera and that allapplications are closed. Click the “Unplug or Eject Hardware” icon again and disconnect thecable.This camera is compatible with USB mass storage. You can connect the camera to yourcomputer using the USB cable provided with the camera to download and save imageswithout using OLYMPUS Master. The following environment is required to use the USBcable to connect the camera to your computer.Windows: Windows 2000 Professional/XP Home Edition/XP Professional/VistaMacintosh: Mac OS X v10.3 or laterNote• If your computer is running Windows Vista, you can select [PC] in Step 3 on P. 35, press Y,and select [MTP] to use Windows Photo Gallery.• Data transfer is not guaranteed in the following environments, even if your computer isequipped with a USB port.• Computers with a USB port added by means of an extension card, etc.• Computers without a factory-installed OS and home-built computersTo download and save images to a computer withoutusing OLYMPUS MasterCard access lampFor detailed operations of OLYMPUS Master, refer to the quick start guidedisplayed upon startup or the help of the OLYMPUS Master.