Olympus FE-310 Advanced Manual

Getting to know your camera better42 EN• If you use a non-Olympus card or a card used for another application, such as a computer,use the [FORMAT] function to format the card.g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card” (P. 26)• An image or movie is being recorded or downloaded (when connected to a computer).• Do not do any of the following while the card access lamp is blinking. Doing so mayprevent the image data from being saved and render the internal memory or cardunusable.• Open the battery/card compartment cover• Remove the battery and card• Performing any of the following operations when not actually taking pictures can depletethe battery power.• Repeatedly pressing the shutter button halfway• Repeatedly using the zoom• To save battery power, set [POWER SAVE] to [ON], or turn off the camera whenever it isnot in use.g “POWER SAVE Setting the camera to the power save mode” (P. 28)• Some items may not be selectable from the menus when using the arrow pad.(The menu items displayed in gray cannot be selected.)• Items that cannot be set with the current shooting mode• Items that cannot be set because of an item that has already been set: [%] and [#],etc.• Some functions cannot be used when there is no card in the camera.[PANORAMA], [PRINT ORDER], [FORMAT], [BACKUP]• When the mode dial is set to R, functions cannot be changed.• To return the changed shooting settings to default settings while shooting, set [RESET] to[YES].g “RESET Changing the shooting functions back to default settings” (P. 21)• All shooting settings except for P mode, [IMAGE QUALITY] and the selected scene modereturn to default settings when the camera is turned off.• Light reflecting from dust and other particles in the air at night may appear as bright specksin pictures taken using the flash.Using a new cardThe card access lamp is blinkingExtending the useful life of the batteryFunctions that cannot be selected from menus/Functions that cannot beselected even by pressing the function buttonsTo return the settings of functions to default settingsPlayback help and troubleshooting tipsBright specks appear in the picture