Olympus FE-35 Basic Manual
Also see for FE-35: Instruction manualManual de instruccionesManuel d'instructionsManual de instruções
                                                                                                                                                                            | |
Contents
| 
5ENPrintingPrinting images at the printer’sstandard settings [ EASY PRINT]1 Display the image to be printed on themonitor.2 Turn on the printer, and then connect theprinter and camera.USB cable (supplied)Multi-connectorOKPC / CUSTOM PRINTEASY PRINT STARTn button3 Press the n button to start printing.4 To print another image, use mn to selectan image, and press the B button.Using OLYMPUS Master 2System requirements andinstallation of OLYMPUS Master 2Install the OLYMPUS Master 2 software by referringto the included installation guide.Connecting the camera to acomputer1 Make sure the camera is turned off.The monitor is off.The lens is retracted.2 Connect the camera to a computer.The camera automatically turns on.●●●EASY PRINTUSBSET OKEXITCUSTOM PRINTPCUSB cable (supplied)Multi-connectorLocate the position of the USB port by referring toyour computer’s instructions manual.3 Use kl to select [PC], and press theB button.The computer automatically detects the camera asa new device on the first connection.WindowsAfter the computer detects the camera, a messageindicating setup completion appears. Confirmthe message and click “OK”. The camera isrecognized as a removable disk.MacintoshIf iPhoto has started, exit iPhoto and startOLYMPUS Master 2.While the camera is connected to the computer,shooting functions are disabled.Connecting the camera to a computer via a USB hubmay cause unstable operation.When [MTP] is set for the submenu that appearsby pressing n after selecting [PC] in Step 3,images cannot be transferred to a computer usingOLYMPUS Master 2.● |
Related manuals for Olympus FE-35
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine