EN-22Shooting/Viewing operationsUsing the flash u ! # $Using the flash u ! # $The camera is initially set to “AUTO” (auto-flash), but you can select from the following fiveflash modes according to the shooting conditions.AUTO (default setting)The flash fires automatically in low light or backlight conditions.u (soft flash)The flash is weakened. This is effective when “AUTO” or “#” (fill-in flash) is too strong andtoo bright.! (red-eye reduction flash)The light from the flash may make the subject’s eyes appear red in pictures taken in dark places.The red-eye reduction flash mode reduces this phenomenon by emitting pre-flashes before firingthe regular flash.# (fill-in flash)The flash fires regardless of the available light. This mode is useful for eliminating shadows onthe subject’s face (such as shadows from tree leaves), in a backlight situation, or for correctingthe color shift produced by artificial lighting (especially fluorescent light).Notes• After the pre-flashes, it takes about one second until the picture is taken. Hold the camera firmly toavoid camera movement.• Effectiveness may be limited if the subject is not looking directly at the pre-flashes, or if the shootingrange is too far. Individual physical characteristics may also limit effectiveness.
