E-378. AppendixPT-030 Frequently Asked QuestionsQ1 : Which digital cameras can be used with the PT-030?A1 : The PT-030 is designed specifically for use with the model SP-310 orSP-350.Q2 : What precautions must be observed when loading the digital camera intothe Case?A2 : Pay special attention to the following items when loading the camera intothe Case.(1) Check that the remaining capacity of the battery in the digital camera issufficient.(2) Check how many more pictures can be saved in image storage.Please use a storage medium with a sufficient space in order to reducethe number of times the Case has to be opened and closed.(3) Remove the strap from the digital camera.When the camera is loaded without removing the strap, the strap mayget caught when the Case is sealed and this will cause water leakage.(4) Before sealing the Case, confirm that the O-ring has been installedproperly.(5) Confirm that the TTL connector cap is closed tightly.(6) Confirm that the O-ring and the O-ring contact surface are free of dirt,hair and other foreign matter.(7) Insert the silica gel for defogging. Please use silica gel for the OlympusCase.(8) Be sure to pull up the mode dial knob of the Case before loading thecamera in it. After inserting the camera, pushdown the mode dial knob tofit it on the camera’s mode dial.(9) Be sure to attach the special balance weight to the tripod seat aftercompleting installation.Q3 : What cautions must be observed when using and storing the Case?A3 : Pay special attention to the following items.(1) When the O-ring contact surface is pressed strongly from the outside ofthe Case, or when the Case is twisted, the waterproof function may beimpaired and water leakage may be caused.(2) When the Case is used, left or stored at the following locations, defectiveoperation or trouble may be caused. Always avoid such locations.(a) Places where the Case can reach high temperatures under directsunlight or in a car, places with extremely low temperatures, andplaces with extreme temperature variations