Olympus SP-510UZ Advanced Manual

Also see for SP-510: Basic Manual Quick start guide

Contents

Olympus SP-510UZ Advanced Manual Manual pdf 20 page image

20 ENMenu operations• Some functions are not available according to the selected mode.g “Functions available in shooting modes and scenes” (P. 72)g “SETUP menus” (P. 39)• The factory default settings are displayed in gray ( ).Still picture image quality and their applications• Normal image modes*1 If you select [SQ1] or [SQ2], select [HIGH] or [STANDARD] after selecting the image size.• Special record modes*2 Not displayed when set to h, s.1 IMAGE QUALITY Changing the image qualityImage quality/Image size Compression ApplicationSHQ 3072 × 2304 Lowcompression• This is useful for printing large images on full-size paper.• This is useful for performing computer imageprocessing, such as contrast adjustment andred-eye correction.HQ 3072 × 2304 StandardcompressionSQ1*1 2560 × 1920 Low compression(High quality) /Standard(Standardcompression)• This is useful for printing on full-size paper.• This is useful for computer editing such asrotating or adding text to a picture.2304 × 17282048 × 1536SQ2*1 1600 × 1200 Low compression(High quality) /Standard(Standardcompression)• This is useful for postcard-sized prints.• This is useful for viewing pictures on acomputer.1280 × 9601024 × 768 • This is useful for sending as e-mailattachments.640 × 480Image quality/Image size ApplicationRAW 3072 × 2304 • Raw uncompressed data.• Data is in ORF format.3:2*2(SHQ, HQ)3072 × 2048 • This is useful for ordering prints from a photostore.JPEG copyPictures taken in the raw data format can be stored in JPEG formatat the same time as they are recorded in raw data. To recordpictures in JPEG format you can select [SHQ], [HQ], [SQ1] or[SQ2] for the record mode, but you cannot select the image size.Pictures are recorded in the size currently set for each recordmode.• In the [IMAGE QUALITY] screen, select [RAW], and press q.• Select a JPEG duplicate setting from [OFF], [SHQ], [HQ], [SQ1] and[SQ2] and press o. (Select [OFF] to save raw data only.)OKMENU SETBACKJPEG DUPLICATE SETTINGSHQOFFHQSQ1[ I N ]