26 EnEn4 Press the shutter button all the way (fully).• The camera takes the picture, and a beep sounds.• When the green lamp stops blinking, you can take the next picture.• The orange lamp blinks while the picture is stored on the card.Taking still pictures using the view finder1 Open the lens barrier fully.• The lens extends and the monitor turns on. Press to turn themonitor off.2 Position the AF target mark in the viewfinder on thesubject.3 Take the picture by following the same procedure as forshooting using the monitor.• Never open the card cover, remove the battery or disconnect the ACadapter while the orange lamp is blinking. Doing so could destroystored pictures and prevent storage of the pictures you have justtaken.J IF CORRECT FOCUS CANNOT BEOBTAINED (FOCUS LOCK)When the subject you want to focus on is not in the center of the frame andyou cannot position the AF target mark on it, you can focus the camera onanother point at roughly the same distance (focus lock) and take the pictureas explained below.1 Open the lens barrier fully.• The lens extends and the monitor turns on.2 Position the AF target mark on thesubject you want to focus on.• When shooting a hard-to-focus subject,point the camera at an object about thesame distance away as the subject.NoteMonitorAF target markDownloaded from ManualsCamera.com Manuals