Olympus STYLUS-7010/-7010 Instruction Manual

Contents

Olympus STYLUS-7010/-7010 Instruction Manual Manual pdf 39 page image

39ENRefer to “Using the Menu” (p. 3) when adjusting the settings of these functions.Resetting the fi le names of pictures[FILE NAME]E SETUP X FILE NAMEMonth: 1 to C(A=October,B=November,C=December)Day: 01 to 31PmddFolder name Folder name File nameDCIM 100OLYMP999OLYMPPmdd0001.jpgPmdd9999.jpgAutomaticnumberingAutomaticnumberingSubmenu 2 ApplicationRESETThis resets the sequential numberfor the folder name and file namewhenever a new card is inserted. *1This is useful when grouping imageson separate cards.AUTOEven when a new card is inserted,this continues the numbering forthe folder name and file name fromthe previous card. This is useful formanaging all image folder names andfi les names with sequential numbers.*1 The number for the folder name is reset to 100, and theone for the fi le name is reset to 0001.Adjusting the CCD and the imageprocessing function [PIXEL MAPPING]E SETUP X PIXEL MAPPINGThis function has already been adjusted atfactory shipping, and no adjustment is neededright after purchase. Approximately once ayear is recommended.For best results, wait at least one minute aftertaking or viewing pictures before performingpixel mapping. If the camera is turned offduring pixel mapping, be sure to perform itagain.To adjust the CCD and the imageprocessing functionPress the E button when [START](submenu 2) is displayed.The camera checks and adjusts the CCD and theimage processing function at the same time.●