Olympus STYLUS-7010/-7010 Instruction Manual

Contents

Olympus STYLUS-7010/-7010 Instruction Manual Manual pdf 42 page image

42 ENFor details on changing the input source of the TV, refer to the TV’s instruction manual.Set the mode dial to q when connecting via an AV cable.Use an HDMI cable that matches the HDMI mini connector on the camera and the HDMI connector on the TV.The movie playback screen cannot be displayed when connecting via an HDMI cable. In addition, thesound will not be played.When the camera and TV are connected by both an AV cable and an HDMI cable, the HDMI cable will takepriority.Depending on the TV’s settings, the displayed images and information may become cropped.Selecting the digital video signal formatfor connecting to a TV via an HDMI cable[HDMI] (STYLUS-7020/μ-7020 only)E SETUP X HDMI“To play back camera images on a TV” (p. 41)Submenu 2 Application480p Images are played back in 480pformat.720p Images are played back in 720pformat.1080i Images are played back in 1080iformat.When set to [1080i], 1080i format takes priorityfor HDMI output. However, if this setting doesnot match the input setting of the TV, the signalformat is changed fi rst to 720p and then to480p. For details on changing the input settingof the TV, refer to the TV’s instruction manual.Saving battery power between shots[POWER SAVE]E SETUP X POWER SAVESubmenu 2 ApplicationOFF Cancels [POWER SAVE].ONWhen the camera is not being usedfor approx. 10 seconds, the monitorautomatically turns off to save batterypower.To resume standby modePress any button or turn the mode dial.Turning off the camera sounds[F SILENT MODE]F SILENT MODESubmenu 1 ApplicationOFF This activates the individual settingsof [SOUND SETTINGS].ONThe electronic sounds (operatingsound, shutter sound, warning sound)and playback sounds are muted.[SOUND SETTINGS] (p. 38)