Olympus STYLUS STYLUS-5010 Instruction Manual

38 ENErasing images [ERASE]ERASESubmenu 1 ApplicationALL ERASE All images in the internal memoryor card will be erased.SEL. IMAGE Images are individually selectedand erased.ERASE/ERASE EVENT*1 Deletes the image displayed.CANCEL Cancels deletion of the image.*1 If G is pressed when an event is played back, allimages in the event are erased.When erasing pictures in the internalmemory, do not insert the card into thecamera. Or set [INTERNAL/SD] to [IN].Before erasing pictures from a memorycard, insert the card into the camera andselect [AUTO] for [INTERNAL/SD].“Selecting a storage device [INTERNAL/SD]” (p. 40)Protected images cannot be erased.To individually select and eraseimages [SEL. IMAGE]1 Use FG to select [SEL. IMAGE], andpress the A button.2 Use HI to select the image to beerased, and press the A button to add aR mark to the image.Press the W zoom button to display an indexview. Images can be quickly selected usingthe FGHI buttons. Press the T button toreturn to the single frame display.MENUOKSEL. IMAGEERASE/CANCELR mark3 Repeat Step 2 to select the images to beerased, and then press the m buttonto erase the selected images.4 Use FG to select [YES], and press theA button.The images with a R mark are erased.●●To erase all images [ALL ERASE]1 Use FG to select [ALL ERASE], andpress the A button.2 Use FG to select [YES], and press theA button.Saving print settings to the image data[PRINT ORDER]q (Playback menu) X PRINT ORDER“Print reservations (DPOF)” (p. 50)Print reservation can be set only for stillimages that are recorded to the card. Set[INTERNAL/SD] to [AUTO].Protecting images [0]q (Playback menu) X 0Protected images cannot be erased by[ERASE] (p. 18, 38), [ERASE EVENT](p. 38), [SEL. IMAGE] (p. 38), or[ALL ERASE] (p. 38), but all images areerased by [MEMORY FORMAT]/[FORMAT](p. 40).1 Use HI to select an image.2 Press the A button.Press the A button again to cancel thesettings.3 If necessary, repeat Steps 1 and 2to protect other images, and press them button.Rotating images [y]q (Playback menu) X y1 Use HI to select an image.2 Press the A button to rotate the image.3 If necessary, repeat Steps 1 and 2 tomake settings for other images, and pressthe m button.The new picture orientations will be savedeven after the power is turned off.●