12 ENDo not insert SD/SDHC memory cardsbefore the camera setup.Do not format the internal memory until thecamera setup is complete. Doing so willerase the camera instruction manual andthe PC software (ib) data that are stored onthe internal memory.Check that your computer meets thefollowing system requirements:Windows XP (SP2 or later)/Windows Vista/Windows 7Refer to the PC software (ib) help guide fordetails on how to use the PC software (ib).2 Select and execute “OLYMPUSCamera Initialization”, which isdisplayed on the computer screenwhen the camera is recognized bythe computer.If nothing is displayed on the camera screeneven after connecting the camera to thecomputer, the battery may be exhausted.Leave the camera connected to thecomputer until the battery has charged, thendisconnect and reconnect the camera.Even if a computer has USB ports, properoperation is not guaranteed in the followingcases:Computers with USB ports installed using anexpansion card, etc.Computers without a factory-installed OS andhome-built computersDouble-click the icon for the camera drive(Removable Disk), and then executeSetup. exe to start the camera setup.3 Follow the instructions on thecomputer screen and setup thecamera.1 Connect the camera to thecomputer.When connecting the camera to thecomputer via USB cable, face the lensdownward.Multi-connectorUSB cable(supplied)Computer (onand running)Indicator lampCharging the batteryWhen the camera is connected to thecomputer, the battery in the camera will becharged.When charging, the indicator lamp light. Whencharging is complete, the indicator lamp will turnoff.If the indicator lamp does not light, thecamera may be incorrectly connected, orthe battery, camera, computer or USB cablemay not be functioning correctly.Camera setupSet the camera date and time, time zoneand display language automatically; installthe camera instruc ion manual and PCsoftware (ib).