Olympus STYLUS TOUGH-8010 Instruction Manual

Also see for STYLUS STYLUS TOUGH-3000 /TOUGH-3000: Instruction manual Quick start guide Specifications

50 ENTo operate images with the TV remote control1 Set [HDMI CONTROL] to [ON], and turn off he camera.2 Connect he camera and TV with an HDMI cable. “Connection via HDMI cable” (p. 49)3 First turn on the TV, and then turn on the camera.Operate by following the operation guide that is displayed on the TV.With some TVs, operations cannot be performed with the TV remote control even though theoperation guide is displayed on the screen.If operations cannot be performed with the TV remote control, set [HDMI CONTROL] to [OFF] andoperate using the camera.Saving battery power between shots [POWER SAVE]t (Settings 3) POWER SAVESubmenu 2 ApplicationOFF Cancels [POWER SAVE].ON When the camera is not being used for approx. 10 seconds, the monitor automatically turnsoff to save battery power.To resume standby modePress any button.Displaying the current altitude/water depth (atmospheric/hydraulic pressure)[MANOMETER](STYLUS TOUGH-8010/ TOUGH-8010 only)t (Settings 3) MANOMETERThe readings may have a margin of error depending on meteorological conditions. Use the readingsonly for your reference.Submenu 2 Submenu 3 ApplicationMANOMETEROFF Cancels the manometer display.ON Displays the current altitude/water depth (atmospheric/hydraulicpressure) in the shooting standby mode screen. (–10 m to 5,000 m)CALIBRATE Proceed to the setting screen. See below.m/ft m This displays in meters.ft This displays in feet.When set to [ON], a warning message appears in the monitor as a water depth close to 7 m (22 9 ft)is reached.