Menu operations• The first two digits of [Y] are fixed.• The time is displayed in the 24-hour format.• To set the time precisely, with the cursor at either “minute” or [Y/M/D], press o as the time signalstrikes 00 seconds.• When [X] has not been set, [ALARM CLOCK] is not available.• When [SILENT MODE] is set to [ON], the alarm will not sound.• When [DUALTIME] is set to [ON], the alarm sounds according to the dual time date and time setting.Setting an alarm• Select [ONE TIME] or [DAILY], and set the alarm time.• You can set snooze or alarm sounds and alarm volume.DUALTIME .......................................................Setting the date and time in another time zoneOFF Switches to the date and time set in [X]. Pictures are recorded with the date andtime set in [X].ON Switches to the date and time set in [DUALTIME]. When setting the dual time,select [ON], and then set the time. Pictures are recorded with the date and time setin [DUAL TIME].ALARM CLOCK ....................................................................................................Setting alarmsOFF No alarm is set or alarm is canceled.ONE TIME Alarm is activated only once. After the alarm goes off, the setting is canceled.DAILY Alarm is activated daily at the set time.TIME Sets the alarm time.SNOOZE OFF No snooze is set.ON Alarm is activated every 5 minutes, up to 7 times.ALARM SOUND 1 LOW / MID / HIGH2 LOW / MID / HIGHMENUCANCELDUALTIMEYY M DD T I M ET I M E20062006 .1111 .2626 1212 :3030 m: Exits a setting.• The date format is the same as that set with[X].• The first two digits of [Y] are fixed.• The time is displayed in the 24-hour format.MOVEALARM CLOCKTIMEALARM SOUNDSNOOZE0 9 : 0 00 9 : 0 0OKSET