AppendixRemoving the card3 Push the card all the way in and release slowly.4 Close the battery compartment/card cover.Note• The card access lamp blinks while the camera is reading the images. Reading of images maytake some time. Do not open the battery compartment/card cover while the card access lamp isblinking. Doing so may damage the data in the internal memory or the card and render theinternal memory or card unusable.An AC adapter is useful for time-consuming tasks such as image downloads to a computer or whenrunning a slideshow for a long period of time. To use an AC adapter for this camera, the multi-adapter (CB-MA1/accessory) is required.Do not use any other AC adapter with this camera.Note• Do not remove or load the battery or connect or disconnect the AC adapter or the multi-adapterwhile the camera is turned on. Doing so could affect the camera’s internal settings or functions.• The AC adapter can be used within the range of AC 100 V to AC 240 V (50/60 Hz).• When using abroad, you may need a plug adapter to convert the plug to match the AC walloutlet. For details, ask at your local electrical shop or travel agent.• Do not use travel voltage converters as they could damage your AC adapter.• The camera is not water resistant during AC adapter use.• Be sure to read the instruction manual for the AC adapter.• The card protrudes slightly and stops. • Grasp the card and remove.AC adapterSAFETY PRECAUTIONS12