2079Continued on next pageTroubleshootingIf a problem arisesPossible cause Corrective action Ref.pageThe camera does not respond or the monitor does not turn onn The power is off. n Turn the camera on. P.26o The battery is exhausted. o Charge the battery. P.17p The battery is temporarily unableto function because of the cold.p Warm the battery by putting itin your pocket for a while.–q There is condensation insidethe camera.q Turn the camera off and wait untilit dries before turning it on again.–r The camera turned offautomatically in the shootingmode.r To save battery power, thecamera automatically entersthe sleep mode after about 3minutes of no activity. Pressthe q.P.26s The camera turned offautomatically in the playbackmode.s To save battery power, thecamera automatically entersthe sleep mode. Turn thecamera on again.P.27t The camera is connected to acomputer.t The camera will not operate whileit is connected to a computer.–The camera does not work properlyn You used a card that had beenformatted on a computer.n This may damage the card orthe images files on the card. Itmay also make the recordingtime exceptionally long orprevent playback. Format thecard with the camera.P.52No picture is taken when the shutter button is pressedn The lens barrier is not fullyopen.n Open the lens barriercompletely.P.26o The card is full. o Erase unwanted pictures orinsert a new card. Beforeerasing, transfer all importantimages to a computer.P.22,118,189p The flash is charging. p Wait until the orange lampstops blinking.P.213q The image is being written tothe card.q Wait until the orange lampstops blinking.P.213r The memory gauge is full. r Wait until there is room in thememory gauge.P.61
