1188 Connecting the camera to a computerConnecting the camera to a computerConnect the camera to the computer using the USB cable provided withthe camera.1 Make sure the camera is turnedoff.• The power lamp is off.• The monitor is off.• The lens is retracted.2 Plug the USB cable into the USB port on the computer.• Refer to your computer’s instruction manual to locate the position of theUSB port.3 Plug the USB cable into themulti-connector of the camera.• The camera turns on automatically.• The monitor turns on and the selectionscreen for the USB connection isdisplayed.4 Select [PC], and press Z.5 The camera is recognized by thecomputer.• Windows 98SE/Me/2000When you connect the camera to yourcomputer for the first time, thecomputer attempts to recognize thecamera. Click “OK” to exit the messagethat is displayed. The camera is recognized as a “Removable Disk”.• Windows XPWhen the camera is connected to the computer, the screen for selecting animage file operation is displayed. As OLYMPUS Master will be used todownload images, click “Cancel”.• Mac OS XThe iPhoto program is the default application for managing digital images.When you connect your digital camera for the first time, the iPhotoapplication starts automatically, so close this application and startOLYMPUS Master.MonitorPower lampMulti-connectorBattery compartment/Connector coverP CPRINTEXITUSBOKSELECT GO
