46 ENUsing OLYMPUS MasterBefore installing the OLYMPUS Master software, please confirm that your computer iscompatible with the following system requirements.For newer operating systems, please refer to the Olympus web site as shown on the backcover of this manual.Operating environmentWindowsOS Windows 2000 Professional/XP Home Edition/XP Professional/VistaCPU Pentium III 500 MHz or laterRAM 256 MB or moreHard disk capacity 500 MB or moreMonitor 1,024 × 768 pixels or more65,536 colors or more (16.77 million colors or more recommended)Other USB port or IEEE 1394 portInternet Explorer 6 or laterQuickTime 7 or later recommendedDirectX 9 or later recommendedNote• Windows 98/98SE/Me are not supported.• Use a computer with a pre-installed operating system. Operations are not guaranteed onhome-built computers or computers with an updated operating system.• Operations are not guaranteed when using an added USB port or IEEE 1394 port.• To install the software, you must log on as a user with administrators’ privileges.MacintoshOS Mac OS X v10.3 or laterCPU Power PC G3 500 MHz or laterIntel Core Solo/Duo 1.5 GHz or laterRAM 256 MB or moreHard disk capacity 500 MB or moreMonitor 1,024 × 768 pixels or more32,000 colors or more (16.77 million colors or more recommended)Other USB port or IEEE 1394 port (FireWire)Safari 1.0 or later (1.3 or later recommended)QuickTime 6 or laterNote• Mac versions earlier than OS X 10.3 are not supported.• Operations are not guaranteed when using an added USB or IEEE 1394 (FireWire) port.• To install the software, you must log on as a user with administrators’ privileges.• Be sure to remove the media (drag & drop onto the trash icon) before performing the followingoperations. Failure to do so could result in unstable computer operation and the need toreboot.• Disconnect the cable connecting the camera to the computer• Turn off the camera• Open the camera’s battery/card compartment coverInstall the OLYMPUS Master software