EN 61Getting to know your camera betterCARD-COVEROPENThe battery/cardcompartment cover is open.Close the battery/card compartment cover.gBATTERY EMPTYThe battery is empty. Charge the battery.The data in the card cannotbe read. Or, the card is notformatted.Select [xD CARD CLEAN], and press e.• Remove the card and wipe the contactarea with a soft dry cloth.• Select [FORMAT] [YES] and presse. All data on the card is erased.There is an error in theinternal memory.Select [MEMORY FORMAT] [YES] andpress e. All data in the internal memoryis erased.NO CONNECTIONThe camera is not connectedto the computer or printercorrectly.Disconnect the camera and connect it againcorrectly.NO PAPERThere is no paper in theprinter.Load some paper in the printer.NO INKThe printer has run out of ink. Replace the ink cartridge in the printer.JAMMEDThe paper is jammed. Remove the jammed paper.SETTINGSCHANGEDThe printer’s paper tray hasbeen removed or the printerhas been operated whilechanging settings on thecamera.Do not operate the printer while changingsettings on the camera.PRINT ERRORThere is a problem with theprinter and/or camera.Turn off the camera and printer. Check theprinter and remedy any problems beforeturning the power on again.rCANNOT PRINTPictures recorded on othercameras may not be printedon this camera.Use a computer to print.Monitor indication Possible cause Corrective actionOKSETCARD SETUPxD CARD CLEANFORMATOKSETMEMORY SETUPPOWER OFFMEMORY FORMAT[ I N ]