Olympus VN-7000PC Instructions Manual

Contents

3- -Notes:• You can choose between 12 and 24 hour display by pressing the DISP/MENU button while settingthe hour and minute.• You can change the order of the date indication by pressing the DISP/MENU button while youare setting the year, month, or day.h Power supplyhHoldSetting the HOLD switch to the direction of the arrow holds the current status, and all buttonoperations are disabled. Remember to release the HOLD switch to use the recorder.4 Press the 9 or 0button to select the itemto set.• Select the item from “Month”,“Day”, “Year”, “Hour” and“Minute” with a f lashingpoint.Battery indicator:When [N] appears on the display, replace the batteries as soon as possible. Size-AAA alkalinebatteries are recommended. When the batteries are depleted, [O] appears on the display, andthe recor-der shuts off.• To replace the battery, make sure that you set the HOLD switch to the opposite direction of thearrow before replacing.Power on: Slide the HOLD switch in the directionopposite that indicated by the arrow.Power off: Slide the HOLD switch in the directionindicated by the arrow while the recorder is notin operation.Standby mode and display shut off:If the recorder is stopped for 5 minutes or longer duringrecording or playing, it goes into Standby (power-save)mode, and the display shuts off. To exit Standby modeand turn on the display, press any button.2 Press the 9 or 0button to select[Sub Menu].3 Press the PLAY/OK (`)button.• [Time & Date] appears on thedisplay, and [\^]] flashes.5 Press the + or – button toset.• Follow the same steps by press-ing the 9 or 0 button toelect the next item, and pressthe + or – button to set.6 Press the PLAY/OK (`)button to complete thesetup screen.• The clock will start from the setdate and time.• Press the PLAY/OK (`) buttonaccording to the time signal.7 Press the STOP (4) button to close the menumode.• This completes the time and date setup procedure.1 Press and hold the DISP/MENU button for 1second or longer to go to the main menu.h Setting time and date [Time & Date]If you have set the time and date, information as to when a sound file was recorded is storedautomatically with that file.When you install batteries for the first time or each time you replace the batteries, the“Month” indication will flash. In such a case, be sure to set the time and date by followingsteps 4 through 6 described below.Time & Date12:00 AM1. 1‘1012:00 AM1. 1‘103:00 PM7.25‘10