14En1 Press bY.• The self-timer settings screen is displayed.2 Select [ON], and press Z.3 Press the shutter button fully to take thepicture.• The self-timer lamp lights for approximately 10seconds after the shutter button is pressed, then starts blinking. Afterblinking for approximately 2 seconds, the picture is taken.1 Press d#.• The flash mode setting screen is displayed.2 Press a/c to select the flash mode, and press Z.3 Press the shutter button halfway.• When the flash is set to fire, the # mark lights steadily.4 Press the shutter button fully to take the picture.Flash working range:W (max.) : Approx. 0.2 m to 3.7 m (0.7 ft. to 12.1 ft.)T (max.) : Approx. 0.6 m to 2.1 m (2.0 ft. to 6.9 ft.)Self timerFlash modesIcon Flash mode DescriptionNoindicationAuto flash The flash fires automatically in low lightor backlight conditions.!Red-eye-reductionflashThe red-eye reduction flash modesignificantly reduces this phenomenon byemitting pre-flashes before firing theregular flash.# Fill-in flash The flash fires regardless of the availablelight.$ Flash off The flash does not fire even in low lightconditions.Self-timer lampd4271_basic_e.fm Page 14 Monday, July 4, 2005 10:33 PM