Olympus XZ-2 Instruction Manual

Also see for XZ-2: Instruction manual Specifications Specifications

Contents

Olympus XZ-2 Instruction Manual Manual pdf 15 page image

15ENBasic photography2Using the shooting modes“Point-and-shoot” photography (P program mode)In mode P, the camera automatically adjusts shutter speed and aperture in responseto subject brightness. Set the mode dial to P.125125 F5.6 01:02:0301:02:033838L NP 0.00.0ISO400HDShooting modeShutter speed Aperture value• The shutter speed and aperture selected by the camera are displayed in the monitor.• The shutter speed and aperture displays fl ash if the camera is unable to achieve optimalexposure.Warning displayexample (blinking) Status Action60"60" F1.8F1.8 The subject is toodark. • Use the flash.20002000 F8F8 The subject is toobright.• The metered range of the camera isexceeded. Set [ND Filter Setting] (P. 35)to [On].Program shift (%)In P mode, you can use the control ring to change thecombination of aperture value and shutter speed whilemaintaining the correct exposure. “s” appears next to theshooting mode during program shift. To cancel programshift, rotate the control ring backwards until “s” is no longerdisplayed.• Program shift is not available when you are using a flash. 250125 F5.6 01:02:0301:02:033838L NPs 0.00.0ISO400HDProgram shift