Olympus XZ-2 Instruction Manual

Also see for XZ-2: Instruction manual Specifications Specifications

Contents

Olympus XZ-2 Instruction Manual Manual pdf 84 page image

84 ENInformation7 FlashAir or Eye-Fi card# Cautions• “FlashAir” SD cards have built-in wireless LAN and cannot be formatted. Use the softwaresupplied with the FlashAir card to format the card.• Use the FlashAir or Eye-Fi card in compliance with the laws and regulations of the countrywhere the camera is used. Remove the FlashAir or Eye-Fi card from the camera ordisable the card functions in airplanes and other locations where use is prohibited.g [Eye-Fi] (P. 91)• The FlashAir or Eye-Fi card may become hot during use.• When using a FlashAir or Eye-Fi card, the battery may run out faster.• When using a FlashAir or Eye-Fi card, the camera may function more slowly. SD/SDHC/SDXC card write-protect switchThe SD/SDHC/SDXC card body has a write-protect switch. If you set theswitch to the “LOCK” side, you will not be able to write to the card, deletedata or format. Return the switch to enable writing. LOCKFormat cardCards must be formatted with this camera before fi rst use or after being used with othercameras or computers.Checking the image saving locationThe memory indicator shows whether the internal memory or card is being used duringshooting and playback.Current memory indicatorv: Internal memory is being usedw: Card is being used# Cautions• Performing [Card setup]/[Memory setup], [Erase], [Sel. Image] or [All Erase] may notcompletely erase all card data. When disposing of the card, damage the card to preventthe disclosure of personal data.Readout/recording process of the cardDuring shooting, the icon (v/w) flashes while the camera is writing data. Never open thebattery/card compartment cover or unplug the USB cable. This can not only damage theimage data but also render the internal memory or card unusable.