47ENAdjust the settings for the functions while referring to “Using the Menu” (p. 3).Operating during shooting mode (Example: Flash mode)1 Tap the right side of the camera body once. POKOKAUTOSETSETFLASH AUTOFLASH AUTOAUTO ! # $//When tapping the camera’s topThe flash mode selection screen is displayed.2 Tap the right or left side of the camera body to select afunction.3 Tap the top of the camera body twice to confirm yourselection.Tap the camera firmly using the pad of your finger.When the camera is stabilized on a tripod for example, tap controlmay not work properly.To prevent dropping the camera when using tap control, strap thecamera to your wrist.Operating during playback modeWhen switched to playback mode by tapping the back of thecamera body once, the operations below can be used.Display next image: Tap the right side of the camera once.Display previous image: Tap the left side of the cameraonce.Start slideshow: Tap the top surface of the camera twice. (The slideshow will automaticallystart for all images stored in internal memory or on the card, with [BGM] set to [OFF].)Display next image during a slideshow: Tilt the camera right or tap the right side of thecamera once.Display previous image during a slideshow: Tap the left side of the camera once.Stop slideshow: Tap the top surface of the camera twice.Return to the shooting mode: Tap the back side of the camera once.To adjust the tap control1 Select [CALIBRATE] in Submenu 2 and press the o button. TOPSET OKMENUBACKSTR INTVLNORMAVG2 Select the part to adjust with AB and press the o button.3 Select the [STR] setting with AB and press the D button.4 Select the [INTVL] setting with AB and press the o button.Check the operation of the camera by tapping on the camera after makingthe settings.Turning off the camera sounds [F SILENT MODE]F SILENT MODESubmenu 1 ApplicationOFF Activates the [SOUND SETTINGS] setting.ON The electronic sounds (operating sound, shutter sound, warning sound) and playbacksounds are muted.[SOUND SETTINGS] (p. 42)●