54 ENUsing OLYMPUS Master 2WindowsAfter the computer detects the camera, amessage indicating the completion of thesetting appears. Confirm the message andclick “OK”. The camera is recognized as aremovable disk.MacintoshWhen iPhoto started, exit iPhoto and startOLYMPUS Master 2.While the camera is connected to thecomputer, shooting functions are disabled.Connecting the camera to a computer via aUSB hub may cause unstable operation.When [MTP] is set for the submenu thatappears by pressing D after selecting [PC]in Step 3, images cannot be transferred to acomputer using OLYMPUS Master 2.Starting OLYMPUS Master 21 Double-click the OLYMPUS Master 2icon.Windowsappears on the desktop.Macintoshappears in the OLYMPUS Master 2 folder.Browse window appears after starting thesoftware.When you start OLYMPUS Master 2 for thefirst time after installation, “Default Settings”and “Registration” screens appear. Followthe instructions on the screen.●System requirements andinstallation of OLYMPUSMaster 2Install the OLYMPUS Master 2 software byreferring to the included installation guide.Connecting the camera to acomputer1 Make sure the camera is turned off.The monitor is off.2 Connect the camera to a computer.The camera automatically turns on.EASY PRINTUSBSET OKEXITCUSTOM PRINTPCConnector coverUSB cable (supplied)Multi-connectorLocate the position of the USB port byreferring to your computer’s instructionsmanual.3 Use AB to select [PC], and pressthe o button.The computer automatically detects the camera asa new device on the first connection.●●●