Omcan FP-IT-0004 Instruction Manual

Contents

7MaintenanceCLEANING THE CUTTERThe cutter must be carefully cleaned at least once a day or more often as necessary. Always wear scratchproof protection gloves. To clean the machine use only a cloth soaked in water and non-lathery detergent fordishes with pH at 7-8 and at least at + 30° C.REASSEMBLING THE CUTTERInsert the vessel by inserting its small pin in the relevant seat. Insert the blade holder pin in its seat. Pull downthe lever by turning the knob by ¼ turn to the right to secure the lid to the vessel.REFERENCEItem Number Model Number Description Manufacturer Model Number10832 FP-IT-0004 Bowl Cutter 4 L / 4 QT 2600 RPM0.5 HP / 373 W 110V/60/1 ETL Sanitation C4Parts BreakdownModel FP-IT-0004 10832Item No. Description Position Item No. Description Position Item No. Description Position61572 Shaft with Regular Knives for C4 0 24619 Lid Plug for C4 54 37160 Frame Body for C4 9037146 Pin and Rod and Knob for C4 1 37168 Magnet until 1992 for C4 56V1 37161 OR Gasket for C4 9437147 Rod Holder Pin for C4 2 37155 Shaft Rod for C4 60 37167 Aluminum Plate from 1999 for C4 102A37148 Clutch Washer for C4 4 37156 Knives Shaft for C4 62 17198 Aluminum Shaft for C4 10437149 Testa Carcassa for C4 6 37169 Knives Holder Pesto for C4 62P 17199 Shaft Pulley for C4 10837150 Clutch Base for C4 8 60288 Upper Knife for Pesto for C4 64V 61576 Grub Screw Din 916 M 6x10 NE for C4 11037151 Clutch Nut for C4 10 60289 Punched Upper Knife for C4 64F 17763 Belt 630x6 until ‘99 for C4 11237152 Microswitch Cam for C4 12 60290 Upper Knife for Kneading for C4 64P 17764 Belt from ‘99 for C4 112A61573 Molla A Tazza 12,2x25x0,7 for C4 15 60291 Serrated Upper Knife for C4 64Z 19355 Foot M5 for C4 11437153 Arm Knob for C4 18 19348 Upper Knife for C4 64 37163 Bottom Safety Grate for C4 11637154 Arm for C4 20 61574 Knives Spacer-Pesto for C4 68P 16494 Motor 110/60 for C4 136B19347 Bowl Slideway for C4 28 37157 Knives Spacer for C4 68 37164 Bottom Plate for C4 15460298 Bowl Slideway until 1997 for C4 28V 60292 Punched Bottom Knife for C4 72F 37165 Motor Holder for C4 16060286 Vite TSP + DIN 965 M 4x16 for C4 30 60293 Serrated Lower Knife for C4 72Z 37166 Upper Plate for C4 16216459 Lid with Gasket from ‘03 for C4 52 19349 Lower Knife for C4 72 60296 Bowl Scraper, Red Color for C4 17018826 Lid until 08/2003 for C4 52V3 61575 Vite Portalama for C4 74 31308 Upper Blade Guard Red for C4 17360287 Lid until 1992 for C4 52V1 37158 Bowl for C4 76 60297 Sharpening Stone for C4 17418829 Lid until 1999 for C4 52V2 19350 Gum until 1999 for C4 80A 31309 Bottom Blade Guard Red for C4 175