Omnicomm Profi User Manual
                                                                                 | |
Contents
| 
Install the terminal and fix with self-tapping screws.AntennasChoose the installation site of antennas based on the antenna cable length.Antennas should be installed inside the vehicle cabin on a flat surface.Distance from antennas to any metal surface (except for the surface of installation)should be not less than 50 mm.Recommended installation site of antennas: vehicle windshield or inner side of thevehicle plastic front panel.1. Degrease the installation site surface2. Remove protective film from the double adhesive tape on the surface of antenna3. Attach the antenna with the adhesive side to the installation site4. Fix the antenna while the adhesive is setting21Installation |
Related manuals for Omnicomm Optim
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine