Omnicomm Profi User Manual
                                                                                 | |
Contents
| 
“Authentication and Encryption Method” – select the data authentication andencryption method used in the Wi-Fi base station.Possible options:«Open» – encryption is not used«WPA_PSK»«WPA_EAP (FAST)«WPA_EAP (PEAP)When using encryption, specify “Login” and “Password” to connect to the Wi-Fi basestation.Press the “Add” button.The “List of networks” section displays Wi-Fi access points, which the terminal can usefor Wi-Fi wireless network data transmission.To connect the terminal to a hidden Wi-Fi network, during the setting specify onlyone Wi-Fi access point.Connection to Communication ServersTerminals support data transmission to two Communication Servers (CS) throughOmnicomm and EGTS protocols.In the “Settings” tab select the “Сonnection” section from the list.In the “EGTS Protocol setup” section:When setting up EGTS data transmission, you must use the TID terminal identification.If the settings are not configured, when transmitting data through EGTS protocol IDOmnicomm will be used for terminal identification.In the “Settings of connection to the communication server” sections:26Operation Parameters Setting |
Related manuals for Omnicomm Optim
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine