59Management Console ConnectionsDesignation Description Designation Description1 Serial port (for Telnet access) 4 Local area network2 DB9 to mini USB 5 PAC Management Software /telnet console3 CAT5e LAN cableConnecting Unified Storage System to external consolesSerial port (mini USB): Use the cable supplied with the system to connect to mini USBport.Ethernet port: An Ethernet cable should be supplied by the user.NOTEALWAYS connect to the primary controller.A null modem may be required if you are using a 3rd party cable.The serial port’s defaults are:Baud Rate 38400Data Bit 8Parity NoneStop Bit 1Flow Control HardwareFor TCP/IP connection and firewall configuration please refer to the PAC ManagementSoftware online help or User’s Manual. If your network environment is not running DHCPserver protocols, a default IP, <10.10.1.1> can be used if you are accessing for the first time.Power ConnectionsOnce all hard drives have been properly installed and the I/O ports or managementinterfaces have been connected, the system can be powered on.ChecklistBEFORE powering on the system, please check the following: Hard drives: Hard drives are correctly installed in the drive trays.
