Pacific Floorcare S-28 Operating Manual
Also see for S-24: Parts & operating manualManualParts & operating manual
                                                            | |
199. RECOVERY SYSTEMRECOVERY TANKTo drain and rinse the recovery tank:1. Lift the hose off the holder and lower the hose end to the desired drain location2. Remove the press-fit cap from the drain hose and squeeze the restriction collar to control the flow3. As the tank drains, lift the recovery tank lid to the fully open position4. Thoroughly clean and rinse out the sediment from the bottom of the tank with a clean water hose• Periodically use cleaner and sanitizer with a cloth or sponge to prevent mold and mildew5. Inspect and clean the debris tray and the vacuum mesh filter screen and ball float system6. Leave the lid open to dryOPTIONAL TANK TREATMENTThe Tank Treatment System (TTS) utilizes Bromine tablets, (typically used in pools and spas) to kill the odor-causingbacteria in the tank. To ensure that TTS is prepared to treat your recovery tank:1. Lift the debris tray out and pinch the two tabs sticking through the underside of the tray2. Check the size of the Bromine puck. Replace when it is approximately 25% of its original size3. Press the TTS holder and bromine puck back into the debris trayCAUTION: Use Bromine only! Do not use chlorine. Chlorine can interact with ammonia-based detergents to causeharmful fumesRETURN TOTABLE OFCONTENTS |
Related manuals for Pacific Floorcare S-24
manualsdatabase
Your AI-powered manual search engine