Jumper and Connector Locations 5-7BIOS Recovery by Crisis Disk 0BIOS Recovery Boot Block 0BIOS Recovery Boot Block is a special block of BIOS. It is used to boot up the system withminimum BIOS initialization. Users can enable this feature to restore the BIOS firmware to asuccessful one once the previous BIOS flashing process failed.BIOS Recovery Hotkey 0The system provides a function hotkey, <Fn+Esc>, for enable BIOS Recovery process whensystem is powered on during BIOS POST. To use this function, it is strongly recommended tohave the AC adapter and Battery present. If this function is enabled, the system will force theBIOS to enter a special BIOS block, called Boot Block.Steps for BIOS Recovery from USB Storage 0NOTE:NOTE:Prior to performing the recovery, prepare a Crisis USB key. The Crisis USB key iscreated by executing the Crisis Disk program in another system with Windows 7 OS.To Create a Crisis USB key, perform the following:1. Format the USB storage disk using the Fast Format option.2. Save KBC and BIOS into one file. The command to do so is:< copy /b KBC.ROM + BIOS.FD P5WE0x64.fd >Figure 5-5. Creating P5WE0x64.fd file3. Save ROM file (file name: P5WE0x64.fd) to the root directory of USB storage. Make surethat there is no other BIOS file saved in the same directory.4. Plug USB storage into USB port.5. Press <Fn+ESC> button then plug in AC power.6. The Power button flashes once.7. Press Power button to initiate system CRISIS mode.8. When CRISIS is complete, the system auto restarts with a workable BIOS.9. Update the latest version BIOS for this machine by regular BIOS flashing process.
