Panasonic 50PZ700U - 50" Plasma TV Quick Start Manual

27Viewing Displaying PC Screen on TV■ PC menu setting (changed as desired)• Making settings “How to Use Menu Functions” to (p. 28)Menu Item Adjustments/Configurations (options)PicturePCadjustNormal Resets PC adjust (Set/No)Sync • H & V: The H and V sync signals are input from the HD/VD connector. (p. 53)• On G: Uses a synchronized signal on the Video G signal, which is input from the Gconnector. (p. 53)Dot clock Alleviates the problem if a picture appears to be vertically-striped, flickers partially or isblurred.H-positionAdjust the horizontal position.V-positionAdjust the vertical position.Clock phaseAlleviates the problem if the whole picture appears to flicker or is blurred.First adjust the Dot Clock to get the best possible picture, then adjust theClock Phase so that a clear picture appears.It may not be possible to display a clear picture due to poor input signals.InputresolutionSwitches to wide display.• Input signal switched from VGA to WVGA• Input signal switched from XGA to WXGAH-frequencyV-frequencyDisplays the H (Horizontal)/V (Vertical) frequencies.• Display rangeHorizontal: 15 - 110 kHzVertical: 48 - 120 Hz• Audio menu (p. 28)• For PC input, only audio signals can be output from PROG OUT terminals.Note