9.2 Configuration9-39.2 Configuration9.2.1 Setting Communication Conditions ConfigurationSetting items Default Specification range RemarkCommunicationmode MEWTOCOL-COM General-purposecommunicationSpecify "general-purposecommunication".Station no. 1 1 - 999 Settings are not necessary.Baud rate 9600300 / 600 / 1200 / 2400/ 4800 / 9600 / 19200 /38400 / 57600 / 115200/ 230400Data length 8 bits 7 bit / 8 bitsParity Odd None / Odd / EvenStop bit 1 bit 1 bit / 2 bitsThe setting must be done according tothe devices connected.RS/CS Invalid Invalid / ValidSet to "Valid" only when CommunicationCassette AFP7CCS2 is used in a 5-wiremode.Send waitingtime(unit: 0.01 ms)0 0 - 10000 Set this when it is necessary to delayresponse to the partner device.Start code STX Invalid Invalid / ValidTerminatorsetting CR CR / CR+LF / Time /ETXThe setting must be done according tothe devices connected.Terminatorjudgment time(unit: 0.01 ms)0 0 - 10000(0 - 100 ms)In cases where "Time" is specified in theterminator setting, set the time for judgingthe terminator.Modeminitialization Do not initializeDo not initialize /Initialize whileperforming settings /Re-initialize whileperforming settingsPerform settings only when a modem isto be connected. Perform settings forstart-up modem initialization.(Note 1) In general-purpose communication, the following setting items need not to be specified.Station no., PLC linkPhone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
