8-24Specifications8.2 Power Supply Unit Specifications8.2.1 General SpecificationsItems DescriptionOperating ambienttemperature 0 to +55COperating ambienthumidity 10 to 95%RH (at 25C, no-condensing)Storage ambienttemperature -40 to +70CStorage ambient humidity 10 to 95%RH (at 25C, no-condensing)All the AC inputs All the DC outputs 2300 V AC, 1 minute (Note)All the AC inputs Protective earth terminals 1500 V AC, 1 minute (Note)Breakdown voltageAll the AC inputs All the alarms 2300 V AC, 1 minute (Note)Insulation resistance(test voltage: 500V DC)All the AC inputs All the DC outputsAll the AC inputs Protective earth terminalsAll the AC inputs All the alarms100 M or largerVibration resistanceBased on JIS B 3502 and IEC 61131-2:5 to 8.4 Hz, half amplitude 3.5 mm8.4 to 150 Hz, constant acceleration 9.8 m/s 2X, Y and Z axes, 10 sweeps (1 octave/mm)Shock resistance Based on JIS B 3502 and IEC 61131-2147 m/s 2, X, Y and Z axes, timesNoise resistance 1500 V[p-p] with pulse widths of 50 ns or 1 μs (based on in-house measurements)Environment Free from corrosive gases and excessive dust.EU Directive applicablestandard EMC Directive: EN 61131-2, Low-Voltage Directive: EN 61131-2Overvoltage category Category II or lowerPollution degree Pollution degree 2 or lowerWeight (main unit) AFP7PSA1: approx. 240gAFP7PSA2: approx. 290g(Note) Cutoff current: 10 mA (Factory default setting)Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
