Panasonic AG-7330 Operating Instructions Manual

|DUBBINGNote: You are cautioned that copying and/or exchanging copyrighted television programming may be copyright infringement.Dubbing with S-VIDEO ConnectorWhen you wish to duplicate a S-VHS tape, two AG-7330 VTRs can be used for duplicating tapes (dubbing).Connect the 4P S-VIDEO cable from the source side S-VIDEO Output Connector to the editor side S-VIDEO Input Connector.Audio CableS-VIDEO Cable|S-Video Out S-Video In |fe](a |SS — aseAudio OutSource VTR Editor VTRAG-7330eTurn both units “ON”.@Turn TV Monitor “ON”.eSet the EXT Timer Selector to “OFF”.Clear the Tape Memory.eSet the Sync Mode Selector as follows:AG-73301) Place the recorded cassette in the source VTR and a blankcassette in the editor VTR.2) Push the Play Button on the source VTR.3) Push the Record Button together with the Play Button to setthe editor VTR.Editor (Recording) VTR; “NORM”,Source (Playback) VTR; “INT”.Insert acassette tape. Make sure that the tab is in place onthe editor VTR.Set the Image Selector on the editor/source VTR to “EDIT”.eSet the Input Signal Selector on the editor VTR to“$-VIDEO”.4) Push the Stop Button to stop the dubbing.Control DubbingSynchro ConnectionCable (VW-K1E)(Option)When an AG-7330 is used as both recording and playbackVTR, the connection shown above makes possible dubbing ofindex signals, too.The operation is the same as for ordinary dubbing.Note:Be sure to set the mode selector in the tape counter to VISS orVASS when dubbing index or address signals.—~34—