- 107 -Major confirmation/error messages to be indicated on the screen in text.∫ It is not a malfunction in following casesDisplayMessagesCHECK CARD.This card is not compatible or it cannot be recognized by the unit.If this message appears even though motion pictures and still pictures are recorded on an SDcard, the card may be unstable. Reinsert the SD card, then turn the unit off and then on again.INVALID/CANNOT SET.Since there is a condition to use the function, it is required to cancel/change other settings.OthersTroubleshootingThe lens or LCD monitorfog up.≥ This is due to condensation. It is not a breakdown. Please referto page 2.A clicking sound is heardwhen the unit is shaken.≥ This is the sound of the lens moving and is not a defect.This sound will no longer be heard when the unit is turned onand change the mode to .Object seems to be warped. ≥ Object seems to be warped slightly when the object movesacross the image very fast, but this is because the unit is usingMOS for the image sensor. This is not a malfunction.PowerProblem Check pointsThis unit cannot be turnedon.This unit does not stay onlong enough.Battery runs down quickly.≥ Charge the battery again to ensure it is sufficiently charged.(l 12)≥ In cold places, the battery using time becomes shorter.≥ The battery has a limited life. If the operating time is still tooshort even after the battery is fully charged, the battery hasworn out and needs to be replaced.This unit cannot beoperated though it isturned on.This unit does not operatenormally.≥ Remove the battery or AC adaptor, wait about 1 minute andthen reconnect the battery or AC adaptor. Then about1 minute later, turn on the unit again. (Conducting the aboveoperation while the media is being accessed may damage thedata on the media.)≥ If normal operation is still not restored, detach the powerconnected, and consult the dealer who you purchased thisunit from.
