- 90 -You can set the auto switch recording and backup recording.≥ Insert SD cards to card slot 1 and card slot 2.∫ Auto switch recordingThis is simple relay recording. It is possible to continuously record on the SD card in the other cardslot even when the available capacity of the SD card runs out during the recording. Note that therewill be a momentary pause in the sound when recording media is switched.≥ is displayed on the media to record the video. will disappear when the recording media isswitched and the auto switch recording is started.≥ The number of recording media switches in auto switch recording is limited to one.∫ Backup recordingSame motion picture can be recorded on two SD cards.≥ is displayed on the cards the motion pictures is recorded.≥ When [SD CARD 1] is selected as the destination of recording the motion pictures, backup will berecorded on [SD CARD 2].≥ It is recommended to record on the SD cards that are same speed class and same capacity whenperforming the backup recording.(Auto switch recording)≥ Destination to record still pictures will be switched to other SD card after performing the autoswitch recording.(Backup recording)≥ Backup recording will not be performed for still pictures.≥ When performing backup recording, even in the case where an error has occurred in one of theSD cards and recording has stopped, recording can be continued using the other SD card.≥ When there is no more remaining recordable time, backup recording stops. When one of the SDcards has capacity remaining, the recording destination of video and photos changes to the SDcard with capacity remaining.[2 SLOTS FUNC.][OFF]: Cancel the setting.[AUTO SW]: Set the auto switch recording[BACKUP]: Set the backup recording
