Panasonic AG-DV1000P Operating Instructions Manual

Also see for AG-DV1000P: Operating instructions Operating instructions

Contents

133 Select OFF or S1 using | or {, and then press SET.OFF: Normal mode.S1: When the S-Video input socket on the monitorthat is connected is an S1-Video socket.(If a wide mode video signal is sent to themonitor, the monitor screen size willautomatically switch to wide mode.)4 Press EXIT to exit the On Screen Display.INPUT TBC Mode1 Press MENU, and select OPTION SETUP1 using Y orZ, and then press SET.2 Select INPUT TBC using Y or Z, and then press SET.3 Select ON or OFF using | or {, and then press SET.OFF: Set to this position when the dubbed images weredisturbed at the ON position.ON: At this position, the subtle shaking and distortionof the pictures are suppressed when a cassettetape which was recorded using another camera orVTR is dubbed on this unit.4 Press EXIT to exit the On Screen Display.Note:The INPUT TBC function does not work for signals from aDV input.POWER SAVE Mode1 Press MENU and select OPTION SETUP1 using Y orZ, and then press SET.2 Select POWER SAVE MODE using Y or Z, and thenpress SET.3 Select OFF, 2H or 6H using | or {, and then pressSET.OFF: This setting does not conserve power when theVTR is off.2H: The VTR turns off automatically if no operation isperformed for approximately two hours.6H: The VTR turns off automatically if no operation isperformed for approximately six hours.4 Press EXIT to exit the On Screen Display.WIDE Mode1 Press MENU and select OPTION SETUP1 using Y orZ, and then press SET.2 Select WIDE MODE using Y or Z, and then press SET.On Screen DisplayMENUOPTION SETUP1OPTION SETUP2OPTION INITIALHOUR METER:SELECT SET:ACCESSMENU:LEAVE MENUMENUSETOPTION SET UP 1POWER SAVE MODEWIDE MODEINPUT TBC:SELECT SET:ACCESSMENU:RETURNSETSETPOWER SAVE MODEOFF 2H 6H:SELECT SET:ACCESSMENU:RETURNMENUSETMENUOPTION SETUP1OPTION SETUP2OPTION INITIALHOUR METER:SELECT SET:ACCESSMENU:LEAVE MENUOPTION SET UP 1POWER SAVE MODEWIDE MODEINPUT TBC:SELECT SET:ACCESSMENU:RETURNSETSETWIDE MODEOFF S1:SELECT SET:ACCESSMENU:RETURNMENUSETMENUOPTION SETUP1OPTION SETUP2OPTION INITIALHOUR METER:SELECT SET:ACCESSMENU:LEAVE MENUOPTION SET UP 1POWER SAVE MODEWIDE MODEINPUT TBC:SELECT SET:ACCESSMENU:RETURNSETSETINPUT TBCOFF ON:SELECT SET:ACCESSMENU:RETURNSettings Using the On Screen Display