Panasonic AG-DVC30 Operating Instructions Manual

Also see for AG-DVC30E: Service manual

Contents

Panasonic AG-DVC30 Operating Instructions Manual Manual pdf 61 page image

61 (E)EDITINGENGLISHDubbing (cont.)5 Press the $ button to stop playback in theplayer.4 Press the $ button to stop the recording inthe recorder.STILL ADV PAUSE STILL ADVINDEXSELECT VAR.SEARCH– VOL +PB.ZOOMSTOP INDEXMULTI/P-IN-P REC A.DUBPLAYC/REW FF/ BSEARCHRESETSEARCHDIGITAL ZOOMRECCOUNTER RESET MODE CHK ZEBRA OISPHOTO SHOTBARSMANUALAUTOSTILL ADV PAUSE STILL ADVINDEXSELECT VAR.SEARCH– VOL +PB.ZOOMSTOP INDEXMULTI/P-IN-P REC A.DUBPLAYC/REW FF/ BSEARCHRESETSEARCHDIGITAL ZOOMRECCOUNTER RESET MODE CHK ZEBRA OISPHOTO SHOTBARSMANUALAUTOYou can perform dubbing with a high imagequality by means of digital signals by using theDV cable (option) to connect the camera-recorder to a digital video unit equipped with aDV connector (IEEE 1394 connector). (P54)Digital input/output2 Press the 1 button to play back the tape inthe player.1 Turn the POWER lever to set the player unitand recorder unit to the VCR mode.1OFFONMODEPOWERCAMERAVCRSTILL ADV PAUSE STILL ADVINDEXSELECT VAR.SEARCH– VOL +PB.ZOOMSTOP INDEXMULTI/P-IN-P REC A.DUBPLAYC/REW FF/ BSEARCHRESETSEARCHDIGITAL ZOOMRECCOUNTER RESET MODE CHK ZEBRA OISPHOTO SHOTBARSMANUALAUTO3 To start recording in the recorder, press theREC button while holding down the REC subbutton.If you are using the remote control unit,press the PLAY button while holding downthe REC button.O If you do this during still-picture playback(P50), the camera-recorder will be set tothe rec pause status.To resume recording from the rec pausestatus, press the ; button.COUNTER RESET TITLESTILL ADV PAUSE STILL ADVINDEX– VOL +STOP INDEXMULTI/P-IN-P REC A.DUBPLAYC/REW FF/ BZOOMSEARCHRESETSEARCHDIGITAL ZOOMRECCOUNTER RESET MODE CHK ZEBRA OISPHOTO SHOTBARSMANUALAUTOO Digitally dubbed sound is recorded in thesame audio mode as the player’s taperegardless of the recorder’s menu setting.O When dubbing is performed with “ON”selected as the 1394 TC REGEN and 1394UB REGEN item settings on the recorder’smenu, the player’s time code and user’s bitcan be copied. (P75, P76)In this case, check the recorder’s screen toverify that the player’s images are beingreceived before starting to record.If you start recording when there are noimages being received from the recorder, itmay not be possible to copy the time codeand user’s bit properly.