Panasonic AG-DVC7P Operating Instructions Manual

Also see for AG-DVC7P: Brochure & specs Service manual

Contents

Panasonic AG-DVC7P Operating Instructions Manual Manual pdf 15 page image

15BBBB eeee ffff oooo rrrr eeee UUUU ssss eeeeUsing the Viewfinder/LCD Monitor1 Pull out the Viewfinder and tilt it up.OThe angular part of the Viewfinder can be turnedupward by 80° and downward by 38°.ODo not pull on the Eyecup to extend theViewfinder.2 Adjust by sliding the Eyepiece Corrector KnobI.12:30:45 AMOCT 15 200212:30:45 AMOCT 15 200212:30:45 AMOCT 15 200212:30:45 AMOCT 15 2002I$ Using the ViewfinderBefore using the Viewfinder, adjust the field of view sothat the displays inside the Viewfinder become clearand easy to read.1 Press the [PUSH OPEN] Button : and, at thesame time, bring the LCD Monitor ; out about90° in the direction of the arrow.OThe Viewfinder goes off.:;2 Adjust the LCD Monitor angle according to thedesired recording angle.OThe LCD Monitor can rotate a maximum of 180°1 from the vertical position to the upwarddirection and a maximum of 90° 2 to thedownward direction. Forcefully rotating the LCDMonitor beyond these ranges will damage theCamera Recorder.OWhen you open the LCD Monitor, be sure thatthe LCD Monitor and the Viewfinder cannottouch.Closing the LCD MonitorPush the LCD Monitor until it is securely locked.180°1 90°2$ Using the LCD MonitorWith the LCD Monitor open, you can also record thepicture while watching it.$ Adjusting Brightness and Color LevelWhen [LCD/EVF SET] on the [DISPLAY SETUP] Sub-Menu is set to [YES], the following items aredisplayed.LCD Brightness [LCD BRIGHTNESS]It adjusts the brightness of the image on the LCDscreen.LCD Color Level [LCD COLOR LEVEL]It adjusts the color saturation of the image on theLCD screen.Brightness of the Viewfinder [EVF BRIGHTNESS]It adjusts the brightness of the image in theViewfinder.To AdjustPress the [PUSH] Dial and select the item to beadjusted, and then turn the [PUSH] Dial to raise orlower the number of vertical bars in the Bar Indication.OA larger number of vertical bars indicates strongerbrightness or color saturation.Increasing the Brightness of the Entire LCDMonitorSet the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].OThese adjustments do not affect the recordedimages.OFor other notes concerning this item, see -49-.LCD/EVF SETPUSH MENU TO RETURNLCD BRIGHTNESS[-]||||----[+]LCD COLOR LEVEL[-]||||----[+]EVF BRIGHTNESS[-]||||----[+]