Panasonic AG-DVX100B Operating Instructions Manual

Also see for AG-DVX100B: Specifications Setup Specifications User guide

Contents

Panasonic AG-DVX100B Operating Instructions Manual Manual pdf 47 page image

47Transferring scene filesYou can transfer the following scene file data toanother DVX 100B connected with a DV(IEEE1394) cable.SCENE: A file selected with the scene dial (F1-F6)SCENE ALL: All scene filesUSER: All user files.• You can only transfer between DVX100B models.1 Connect camera 1 to camera 2 with a DV(IEEE1394) cable.For connection (Page 54)When choosing SCENE (step 7), set the scenedial on camera 1 to the item you want to send,and set the scene dial on camera 2 to the itemyou want to send it to. (For example you cansend F1 to F2.)2 Put camera 1 in CAMERA mode and turn offthe DV CONTROL function under the OTHERFUNCTIONS screen in the setup menus.• For menu operation (Page 66)• You can also use the menu buttons on theremote control. (Page 19)3 Put camera 2 in VCR mode, stop or eject thecassette tape, and then input a 1394 videosignal.4 Put camera 2 in the file receiving mode.In the setup menus, OTHER FUNCTIONSscreen, set FILE RECEIVE to YES.5 The following screen appears, so move theOPERATION lever e to select YES and pressthe OPERATION lever (h).RECEIVE MODE blinks on the screen.6 Put camera 1 in the file transfer mode.In the setup menus, OTHER FUNCTIONSscreen, set FILE TRANS to YES.7 The following screen appears, so move theOPERATION lever r, select the data fortransfer, and press the OPERATION lever (h).8 The following screen appears, so move theOPERATION lever e to select YES and pressthe OPERATION lever (h).File transfer starts.FILE TRANS appears on the screen of camera1 when the transfer is complete.FILE RECEIVE OK → PLEASE POWER OFFappears on the screen of camera 2.Be sure to turn off camera 2.• When turning off camera 2, be sure to usethe power switch. Under no circumstancescut the power by disconnecting the battery orAC adapter.OTHER FUNCTIONSPOWER SAVEH.P MODEFILE RECEIVEHOUR METERUSER FILEFILE TRANSYESTAPE- - - -- - - -OFFFILE RECEIVESCENE(SCENE)EXECUTE ?NOPUSH STILLYESWhen a file is transferring, do not disconnect theDV (IEEE1394) cable or turn off the power ofcamera 2.It will not transfer correctly.• FILE TRANS NG appears on the screen ofcamera 1 if a problem occurs during the transfer.Check the connections and settings on bothcameras.• Do not change the scene dial when RECEIVEMODE is displayed on camera 2. The transfer willstop if you switch the PROGRESSIVE settingsfrom 60i to 24P (FILE RECEIVE NG appears oncamera 2).OTHER FUNCTIONSPOWER SAVEH.P MODEFILE RECEIVEHOUR METERUSER FILEFILE TRANS YESTAPE00015H- - - -OFFFILE TRANSUSERSCENE ALLSCENEFILE TRANSSCENE(SCENE)EXECUTE ?NOPUSH STILLYESShooting