Panasonic AG-HMR10P Operating Insructions

Also see for AVCCAM AG-HMR10E: Brochure & specs Brochure Operating instructions

Contents

Panasonic AG-HMR10P Operating Insructions Manual pdf 32 page image

321 Press the portable recorder’s [POWER]button for 2 seconds or longer to turn onthe power. (Page 26)2 Press the [MENU] button.Using the setup menus (Page 29)3 Select [DISPLAY SETUP] → [LCD SET] →[YES], and then press the [ENTER] button.4 Press to select an item, and thenpress the [ENTER] button.LCD COLOR LEVEL: Adjusts the color density ofthe screen.LCD BRIGHTNESS: Adjusts the brightness of thescreen.LCD CONTRAST: Adjusts the contrast of thescreen.• Be careful because if all the LCD monitoradjustment values are set to the lowest value, thescreen will be difficult to see.5 Press to set the item value, and thenpress the [ENTER] button.6 Press the [MENU] button to close the menu.Adjusting the LCD monitor• Slight time errors may occur, so check that thetime is correct before recording.• When using the recorder overseas, do not setthe [CLOCK SET] time to the local time, butinstead enter the time difference from GreenwichMean Time in [TIME ZONE]. (Page 96)Setting the date and time/Recharging the built-in battery/Adjusting the LCD monitor (continued)Recharging the built-in batteryThe recorder’s built-in battery saves the date andtime.When “LOW INTERNAL BATTERY” is displayedeven when the date and time are set, it meansthat the built-in battery is low. Recharge using thefollowing procedure.Reset the date and time after the battery is fullyrecharged.1 Connect the AC adapter to the portablerecorder. (Page 25)• Leave off the power of the portable recorder.2 Leave the portable recorder like this forabout 4 hours.• The built-in battery recharges during thistime.• Check the time code and menu operationsafter recharging.If the date and time are still not memorized afterrecharging, the built-in battery must be replaced.Consult the place of purchase.