Panasonic AG-HMR10P Operating Insructions

Also see for AVCCAM AG-HMR10E: Brochure & specs Brochure Operating instructions

Contents

Panasonic AG-HMR10P Operating Insructions Manual pdf 58 page image

58Uploading the metadata(META DATA)You can perform any of the following operations.If necessary, perform preparations prior to theoperation.Loading the metadata• Insert the SD Memory Card on which themetadata is recorded into the portable recorder.(For a description of the clip metadata,see page 57.)Selecting whether to record the metadataon the SD Memory CardInitializing the metadata inside the portablerecorderDisplaying the metadata inside the portablerecorder1 Press the [MODE] button to select RECmode.Operation modes (Page 28)2 Press the [MENU] button.Using the setup menus (Page 29)3 Press to select [META DATA], andthen press the [ENTER] button or .4 Press to select an item, and thenpress the [ENTER] button.CARD READ:The metadata that is set on the SD MemoryCard is loaded onto the portable recorder.Press the [ENTER] button to select themetadata to be loaded, select whether or notthe metadata is to be loaded (YES/NO), andthen press the [ENTER] button.· Up to 10 items of metadata on the SDMemory Card can be displayed, startingfrom the most recent creation date.· If characters other than single-bytealphanumeric characters are used in themetadata file name that is loaded, they aredisplayed as “∗”.RECORD:Sets whether to record the metadatathat is loaded onto the portable recordersimultaneously on the SD Memory Card.Select whether or not to record (ON/OFF),and then press the [ENTER] button.The factory default setting for this mode is[OFF].USER CLIP NAME:The USER CLIP NAME recording method isselectable. See the next item for details.CLIP COUNT RESET:Resets the COUNT value to 1.Select whether or not to reset (YES/NO), andthen press the [ENTER] button.META DATA PROP:Select [YES] to display the metadata thathas been recorded on the portable recorder.META INITIAL SET:Initializes the metadata that has beenrecorded on the portable recorder.Select whether or not to initialize (YES/NO),and then press the [ENTER] button.5 Press the [MENU] button to close the menu.Clip metadata (continued)