Panasonic AG-HMX100 Operating Instructions Manual

Also see for AG-HMX100E: Operating instructions Operating instructions Operating instructions

Panasonic AG-HMX100 Operating Instructions Manual Manual pdf 12 page image

12Chapter 1 Applying Effects to Video and SoundThe slope is set to specify the luminance level range of thearea to be removed. The setting value can be increased toremove only the area of the luminance level closest to thespecified level.Set [REVERSE] (reversing the key signal) to [ON] or [OFF]using the rotary 4 control.The factory default setting is [OFF].Set [K LEVEL] (transparency level of the key) in the rangeof [0] to [255] using the rotary 5 control.The factory default setting is [255].[CROP]Settings can be made in the same way as in the [CROP]submenu of the [PATTERN KEY] menu ( page 5).DSK slide on/off [DSK ON/OFF]The direction and time of the slide in/out operation can beset for executing the downstream key.[SLIDE I.] and [SLIDE O.] are effective if [KEY] is set to[TITLE] in the [DSK SOURCE] submenu.Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5OFF 2-64OFFOFFONDSK OFFME TRIG OFFSLIDE I. OFFSLIDE O. 8SPEEDON/OFFOperate the rotary 2 control to set whether or not toexecute downstream key additionally during auto transitionexecuted with the AUTO TAKE button.The factory default setting is [OFF].Operate the rotary 3 control to set the direction of the slidein operation when DSK is ON.The factory default setting is [OFF].Operate the rotary 4 control to set the direction of the slideout operation when DSK is ON.w: Sliding toward the leftq: Sliding toward the righte: Sliding toward the topr: Sliding toward the bottomThe factory default setting is [OFF].Operate the rotary 5 control to set the sliding speed.Select an even number in the range of [2] to [64].The factory default setting is [8].[DSK EFFECTS]Settings can be made in the same way as in the [EFFECTS]submenu of the [TRANSITION] menu ( page 4).Setting the Fade [FADE]The [DSK FADE] menu is used to set the fade effect( page 11).Rotary 1 Rotary 2 Rotary 3 Rotary 4 Rotary 5BLACKWHITEBLUEAFTERPREONOFFFADE BLACKTO ONAUDIO AFTERPHONESelect the video color after fading from [BLACK], [WHITE],and [BLUE] using the rotary 2 control.The factory default setting is [BLACK].Set [AUDIO] (sound fading) to [ON] or [OFF] using therotary 3 control.The factory default setting is [ON].Set [PHONE] (fading of headphones output) to [AFTER] or[PRE] using the rotary 4 control. [AFTER] generates soundwith fade applied, while [PRE] generates sound withoutfade.The factory default setting is [AFTER].