Panasonic AG-HPD24P Operating Instructions Manual

Contents

Panasonic AG-HPD24P Operating Instructions Manual Manual pdf 19 page image

Main Mode: Thumbnail Screen 19Main Mode2 Select the clip to delete.3 Press the MENU button.4 Use the Up/Down/Left/Right cursor buttons tochoose the OPERATION - DELETE menu settingand press the SET button.5 Select YES in the confirmation message thatappears and press the SET button.This deletes all selected clips.◆ NOTE:• When DELETE is assigned to a USER button, you can delete thethumbnail by pressing the USER button instead of making amenu selection.• To interrupt deletion, press the SET or the CANCEL button tocancel the operation. Note that partially deleted clips cannot berestored by canceling.This section describes how to restore bad clips that havebeen damaged due sudden power outages during recordingor for other reasons. Such clips are marked by the bad clipindicator (yellow ). Use the following procedure to repairbad clips.1 Open the thumbnail screen.2 Select the bad clip to repair.3 Press the MENU button.4 Use the Up/Down/Left/Right cursor buttons tochoose the OPERATION - REPAIR CLIP menusetting and press the SET button.5 Select YES in the confirmation message thatappears and press the SET button.Select NO when you do not want to repair the clip.◆ NOTE:• Some clips are so badly damaged they cannot be repaired.Such clips are indicated by a red .A clip spanning multiple P2 cards that cannot be recognizedas a complete clip is marked by the incomplete clip( indicator). The reconnection function allows you toreconnect related clips and restore the original clip.◆ NOTE:• Incomplete clips occur under the following conditions.- When the individual clip segments on each P2 card that make upthe clip are copied separately.- When the clip segments on each card that make up a cliprecorded on multiple cards are separately copied to a storagedevice and then copied back to a P2 card.- When a 5-minute or longer DVCPRO HD or AVC-Intra 100 clip (10-minute or longer DVCPRO50 or AVC-Intra 50 and 20-minute orlonger DVCPRO or DV clip) is copied to a storage device andlater written back to a P2 card.1 Open the thumbnail screen.2 Select the incomplete clips to reconnect.◆ NOTE:• Thumbnails with an incomplete clip indicator( ) are usuallygrouped to together.3 Press the MENU button.4 Use the Up/Down/Left/Right cursor buttons tochoose the OPERATION - RE-CONNECTION menusetting and press the SET button.5 Select YES in the confirmation message thatappears and press the SET button.Select NO when you do not want to reconnect the clip.Repairing and Reconnecting ClipsRepairing bad clips2,4,53Reconnecting incomplete clips2,4,53